0Yakundwa

ESP32-C3 Internet of Things Development Board WiFi+5.0 bluetooth Dual-mode Module Wireless Communication Module

4.1609

$7.99 /$9.75

*Name:
*Email:
*Phone:
*Quantity:
*Content:
Attachment:

Supports JPG, JPEG, PNG, PDF, EXCEL, WORD, RAR, ZIP, 7z formats

$5.11 /$9.75

Shipping to: United States | Express delivery: 7-12 business days | Standard delivery: 15-25 business days

location

Gura nonaha Ongera ku gari

Ikarita y'inguzanyo cyangwa debit

Kwishyura neza bihamye

Impano y'ubuntu

Impano y'ubuntu ihabwa buri guhaha

Politiki yo kohereza

Kohereza kubuntu ku byaguzwe hejuru ya $9.9

Politiki yo kugarura

Impano zagaragajwe zishobora kugarurwa mu minsi 40 nyuma yo kubona ibintu. Impano zihariye ntizishobora kugarurwa. Impano zaguzwe hamwe na coupon zishobora guhindurwa gusa.

Impano y'ubuntu

Murakaza neza kuri Roymall, urubuga rwawe rw'impano zihariye. Turashimira cyane ubufasha bwawe, kandi turabategereza impano y'ubuntu buri guhaha. Shakisha ibyifuzo byawe kandi witegure kubona impano yawe.

Politiki yo kohereza

Tuzakora neza kohereza ibintu nyuma yo kubona ibyaguzwe.Mu minsi 2, ibintu bizaba byarangiye.Mu minsi 5-7 (Kuwa mbere kugeza Kuwa gatatu), ibintu bizaba byarangiye.Kohereza kuri ibihugu byinshi bishobora gutwara igihe runaka.

1. Politiki yo kugarura

Twemera gusa impano zaguzwe kuri roymall.com. Impano y'ubuntu ntishobora kugarurwa. Kugirango impano ishobore kugarurwa, igomba kuba itarakoreshwa.Nyuma yo kubona inama, subiza impano yawe.Tuzakora impano yawe mu minsi 3-5 nyuma yo kubona.Impano zihariye ntizishobora kugarurwa.Koresha service@roymall.com cyangwa Whatsapp: +447549870296

2.Politiki yo kugarura

Uzahabwa impano yawe nyuma yo kuyisubiza. Amafaranga yo kohereza ntayisubizwa.Koresha service@roymall.com cyangwa Whatsapp: +447549870296

MCU:

• Built-in ESP32-C3FH4 or ESP32-C3FN4 chip, RISC-V 32-bit single-core microprocessor, the maximum frequency is 160MHz

• 4MB embedded flash

• 384KBROM

• 400KB SRAM (of which 16KB is dedicated to cache)

• 8KBRTCSRAM

WiFi:

• Support IEEE802.11b/g/n protocol

• Working channel center frequency range: 2412~2484MHz

• Supports 20MHz and 40MHz bandwidth in the 2.4GHz frequency band

• Support 1T1R mode, data rate up to 150Mbps

• Wireless Multimedia (WMM)

• Frame aggregation (TX/RXA-MPDU, TX/RXA-MSDU)

• Immediate Block ACK (ImmediateBlockACK)

• Fragmentation and reorganization (Fragmentationanddefragmentation)

• Transmission opportunity (Transmissionopportunity, TXOP)

• Beacon automatic monitoring (hardware TSF)

• 4 × virtual Wi-Fi interface

• Support infrastructure network (InfrastructureBSS) Station mode, SoftAP mode, Station+SoftAP mode and promiscuous mode at the same time. Please note that when the ESP32-C3 series scans in Station mode, the SoftAP channel will change at the same time

• Antenna diversity

• 802.11mcFTM

Bluetooth:

• Bluetooth Low Energy (BluetoothLE): Bluetooth5, Bluetoothmesh

• Rate support 125Kbps, 500Kbps, 1Mbps, 2Mbps

• Broadcast Extensions (AdvertisingExtensions)

• Multiple Advertisement (MultipleAdvertisementSets)

• Channel Selection (ChannelSelectionAlgorithm#2)

Hardware:

• Module interface: GPIO, SPI, UART, I2C, I2S, infrared remote control (remotecontrolperipheral), LEDPWM controller, general DMA controller, TWAI® controller (compatible with ISO11898-1), USB serial port/JTAG controller, temperature sensor , SAR A/D converter

• 40MHz integrated crystal oscillator

• Working environment temperature: -85°C version module: -40~85°C-105°C version module: -40~105°C

Package incldued:

1 x ESP-C3-12F-Kit Series Development Board

Gura ukoresheje Paypal

Products related to this item

Loading related products...

❮

❯

Videos for similar product

Loading product videos...

❮

❯

Electronics Ranking

More Electronics

ESP32-C3 Internet of Things Development Board WiFi+5.0 bluetooth Dual-mode Module Wireless Communication Module

Customer Reviews

4.70 out of 5

See all 52 reviews

5 star

2 (100%)
4 star

0 (0%)
3 star

0 (0%)
2 star

0 (0%)
1 star

0 (0%)

Write a Review Get double review points if you are one of the first 3 reviews published!

All Reviews (52)
Image ( 1 )
Video (0)
All Star
- All Star(52)
- 5 Star (2)
- 4 Star (0)
- 3 Star (0)
- 2 Star (0)
- 1 Star (0)

Sort by:

Top Review

Top Review
Most Helpful
Most Recent

Reviews only from your country (United States)

Show Original

A part of the review has been auto-translated.

Tom3112 VIP3
DE

05/07/2022

Works flawlessly. You just have to know that it is a normal RGB LED and not a neopixel.

(LOW = activ)

Red = IO3
Green = IO4
Blue = IO5

Works flawlessly. You just have to know that it is a normal RGB LED and not a neopixel.

(LOW = activ)

Red = IO3
Green = IO4
Blue = IO5

Works flawlessly. You just have to know that it is a normal RGB LED and not a neopixel.

(LOW = activ)

Red = IO3
Green = IO4
Blue = IO5

5

Comments (1)

Show Original
DrMichael VIP5
NZ
08/06/2022

Well packaged, received in good condition and excellent delivery time (13 calendar days from order).

The C3 has become my favorite esp32 with a good balance of performance, IO capability and power consumption. I am jappy to recommend it.

Well packaged, received in good condition and excellent delivery time (13 calendar days from order).

The C3 has become my favorite esp32 with a good balance of performance, IO capability and power consumption. I am jappy to recommend it.

Well packaged, received in good condition and excellent delivery time (13 calendar days from order).

The C3 has become my favorite esp32 with a good balance of performance, IO capability and power consumption. I am jappy to recommend it.
Rotate left Rotate right
1

Comments (1)

Show Original

Show:

12...30

Total 0 pages

Go to page

Customer Q&As

Searching for relevant results...

Can't find your answer? Ask a new questionorCustomer Service

Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.

showing 1-12 of 12 |

Show Original

A part of the QA has been auto-translated.

0

Q:
I bought this some months back. Anybody has the steps to set this up for Windows with Arduino IDE? So far I have been only able to blink some LEDs. No pin information on the SPI usage. And after some months even Arduino is not detecting it now. I only see this chip id - ESP32-D0WDQ6, but it fails to connect. Is there any way to get this working for displays ST7735 or ILI9488 without a big setup?

I bought this some months back. Anybody has the steps to set this up for Windows with Arduino IDE? So far I have been only able to blink some LEDs. No pin information on the SPI usage. And after some months even Arduino is not detecting it now. I only see this chip id - ESP32-D0WDQ6, but it fails to connect. Is there any way to get this working for displays ST7735 or ILI9488 without a big setup?
I bought this some months back. Anybody has the steps to set this up for Windows with Arduino IDE? So far I have been only able to blink some LEDs. No pin information on the SPI usage. And after some months even Arduino is not detecting it now. I only see this chip id - ESP32-D0WDQ6, but it fails to connect. Is there any way to get this working for displays ST7735 or ILI9488 without a big setup?

A:

I use the Arduino IDE. To make it work, I selected the ESP32C3 Dev Module board. That let me upload the sketch. Don't use the suggestion in the answer to another question here. That board selection is wrong for this product.

I use the Arduino IDE. To make it work, I selected the ESP32C3 Dev Module board. That let me upload the sketch. Don't use the suggestion in the answer to another question here. That board selection is wrong for this product.

Answered by BG251724221 on 09/03/2024Helpful (0)
0

Q:
Ekenh9r board available?

Ekenh9r board available?
Ekenh9r board available?

A:

yes, I think

yes, I think

Answered by BG833401214 on 01/11/2022Helpful (0)
0

Q:
Excuse me, do you know how I can select this board in Arduino? I get these:ESP32 Dev Module, ESP32 Wrover Module, ESP32 Pico Kit but they don't look alike

Excuse me, do you know how I can select this board in Arduino? I get these:ESP32 Dev Module, ESP32 Wrover Module, ESP32 Pico Kit but they don't look alike
Excuse me, do you know how I can select this board in Arduino? I get these:ESP32 Dev Module, ESP32 Wrover Module, ESP32 Pico Kit but they don't look alike

A:

try ESP32 Arduino > NodeMCU-32S

try ESP32 Arduino > NodeMCU-32S

Answered by Sandy on 08/07/2022Helpful (0)
0

Q:
is this compatible with arduino ise?

is this compatible with arduino ise?
is this compatible with arduino ise?

A:

When I selected ESP32C3 Dev Module, I got to upload my sketch. Can't figure out the LED, though.

When I selected ESP32C3 Dev Module, I got to upload my sketch. Can't figure out the LED, though.

Answered by BG251724221 on 09/03/2024Helpful (0)
0

Q:
How does one set the BLE transfer speed on this board?

How does one set the BLE transfer speed on this board?
How does one set the BLE transfer speed on this board?

A:

Maybe it can't set the speed

Maybe it can't set the speed

Answered by Rhubarb on 07/04/2024Helpful (0)
0

Q:
I tried using the suggested board in Arduino IDE, but that doesn't work. I get this error:

I tried using the suggested board in Arduino IDE, but that doesn't work. I get this error:<br/>This chip is ESP32-C3 not ESP32.<br/>Do you have any other suggestion regarding the board selection? Thanks!
I tried using the suggested board in Arduino IDE, but that doesn't work. I get this error:

A:

try ESP32 Arduino > NodeMCU-32S

try ESP32 Arduino

Answered by Leon on 10/03/2024Helpful (0)
0

Q:
how do i flash this? tried few methods but can not seem to get anything to upload

how do i flash this? tried few methods but can not seem to get anything to upload
how do i flash this? tried few methods but can not seem to get anything to upload

A:

I use the Arduino IDE. To make it work, I selected the ESP32C3 Dev Module board. That let me upload the sketch. Don't use the suggestion in the answer to another question here. That board selection is wrong for this product.

I use the Arduino IDE. To make it work, I selected the ESP32C3 Dev Module board. That let me upload the sketch._Don use the suggestion in the answer to another question here. That board selection is wrong for this product.

Answered by BG251724221 on 09/03/2024Helpful (0)
0

Q:
I would like to know what each gpio pin can and cannot do.

I would like to know what each gpio pin can and cannot do.
I would like to know what each gpio pin can and cannot do.

A:

check the pinout

check the pinout

Answered by Monoch romasy on 08/07/2022Helpful (0)
0

Q:
how can i upload a code? i get error below Compilation complete. esptool.py v3.3 Serial port COM3 Connecting...................................... A fatal error occurred: Failed to connect to ESP32-C3: Serial data stream stopped: Possible serial noise or corruption. For troubleshooting steps visit: ***** Upload error: Failed uploading: uploading error: exit status 2

how can i upload a code? i get error below Compilation complete. esptool.py v3.3 Serial port COM3 Connecting...................................... A fatal error occurred: Failed to connect to ESP32-C3: Serial data stream stopped: Possible serial noise or corruption. For troubleshooting steps visit: ***** Upload error: Failed uploading: uploading error: exit status 2
how can i upload a code? i get error below Compilation complete. esptool.py v3.3 Serial port COM3 Connecting...................................... A fatal error occurred: Failed to connect to ESP32-C3: Serial data stream stopped: Possible serial noise or corruption. For troubleshooting steps visit: ***** Upload error: Failed uploading: uploading error: exit status 2

A:

maybe you can contact the customer service.

maybe you can contact the customer service.

Answered by Hoydenism on 06/06/2022Helpful (0)
0

Q:
have you got example codes for this? i found this but cant download the files if you can can you send the link plz?

have you got example codes for this? i found this but cant download the files if you can can you send the link plz?
have you got example codes for this? i found this but cant download the files if you can can you send the link plz?

A:

http://myosuploads3.banggood.com/products/20220512/20220512032853ESP32C3CH340.rar

http://myosuploads3.banggood.com/products/20220512/20220512032853ESP32C3CH340.rar

Answered by Van Gogh on 12/05/2022Helpful (0)
0

Q:
Do KiCad schematics exist for this board? Would be great if so! Thanks!

Do KiCad schematics exist for this board? Would be great if so! Thanks!
Do KiCad schematics exist for this board? Would be great if so! Thanks!

A:

No answer yet.
0

Q:
On which pins can I connect with I2C?

On which pins can I connect with I2C?
On which pins can I connect with I2C?

A:

No answer yet.